Dynotest for Iveco Daily 2014-2022

The device is compatible with:

• Iveco Daily 2014-2022

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation. 

Information about the operation modes of the device:

The hazard warning light on the dashboard will blink each time the device switches between modes.

Mode 1

Pull 4 times High beam switch.
The hazard warning light on the dashboard will blink 1 time.
In this mode, the mileage block function is not active. 

Mode 2

Pull 4 times High beam switch
The hazard warning light on the dashboard will blink 2 times.
After that, the odometer will register 10 kilometers for every 100 kilometers driven, and the speedometer will display the actual speed. 

Mode 3

Pull 4 times High beam switch
The hazard warning light on the dashboard will blink 3 times.
From then on, the odometer will count 1 kilometer for every 100 kilometers driven, and the speedometer will show the actual speed. 

Mode 4

Pull 4 times High beam switch
The hazard warning light on the dashboard will blink 4 times.
After that, the odometer will be stopped - the mileage block function is active; the speedometer will show the actual speed. 

Important for successful instalation and use:

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.