Scanmatik 2 PRO

Scanmatik is a professional multi-brand scanner designed to diagnose the electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and blinkers made for standard SAE J2534 and RP1210 interfaces.

New Scanmatik features:

• • Galvanic isolation of the USB port (with power);
  • Redesigned K-line and CAN bus protection on a new component base;
  • Increased Bluetooth speed by about 20%;
  • Pulsed power supplies of proprietary design (no heating, wide input voltage range from 5 to 55V);
  • Load-Dump surge protection (when the generator is turned off on a running engine).
    

• • Provide programming voltage (5-24V) to OBD connector pins: 6, 8, 11, 12, 13, 14;
  • AUX programming voltage output (using an additional cable).

For full support of peripherals on GM (GDS2) and VAZ/Renault cars:

• • Additional CAN bus on pins 12-13 operating in 12H-13L or 12L-13H configuration.

Description:

The device works with a personal computer, tablet or smartphone. It comes with software for Windows and Android. After installing the driver (included), it works with third-party software developed for SAE J2534 and RP1210 standards. Both USB and Bluetooth interfaces can be used to connect to the adapter. The kit includes the full current version of the software (all currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2. It works with a large number of diagnostic programs and blinkers made for standard SAE J2534 and RP1210 interfaces.

SM2-PRO adapter specifications

• • Interfaces for communication with a computer (tablet, smartphone) - USB or Bluetooth;
  • Power supply voltage: 5... 36V from the vehicle's mains or USB (galvanic isolation with power supply);
  • Current consumption of no more than 350mA;
  • Pulsed power supplies of own design (no heating, wide input voltage range from 5 to 55V);
  • Load-Dump surge protection (when the generator is turned off on a running engine).
  • Supported data buses:
    • • • 13 x ISO-9141/ISO-14230 (K-LINE);
        • 1 x J1850VPW;
        • 1 x J1850PWM;
        • 4 x CAN;
        • 1 x Single CAN cable.
  • Built-in multiplexer for switching diagnostic lines;
  • Widest support for J2534-1/2 standards;
  • Programming supply voltage (5-24V) to OBD2 connector pins: 6, 8, 11, 12, 13, 14;
  • AUX programming voltage output;
  • Bluetooth range, no less than: 10m;
  • Dimensions of the adapter (L x W x H), no more than: 97×75×22mm;
  • Weight of the device in the basic configuration, not more than: 1 kg.