- Accessories
- Airbag Reset Tools
- Automotive Repair Software
- Bike Programming
- Car Radio Tools
- Dash Tools (Mileage/Km Correction)
- Diagnostic Tools
- ECU Programming
- Emulators
- Immo Tools (Key Programmer)
- Industrial Equipment Programming Tools
- RocketDump Software
- Software & Licenses
- Tuning Tools
- Universal Programmers
- SALE
text_empty
I/O TERMINAL HW 10
I/O TERMINAL Programmer HARDWARE HW 10
Both, our and one of the leading programmers on the car electronics market
The I/O Terminal it is a great tool with a wide range of functionality for many cars. To repair some ECU (Electronic Control Unit), normally you have to open ECU and connect BDM programmer.
The I/O Terminal can offer functions programming ECU without require it to be opened. All procedures can accomplish via CAN/K-line or from OBD in some rare cases.
The I/O Terminal also supports some difficult controllers ECU that are not covered by other tools.
We offer here only hardware: programmer + 2 adapters + USB cable
The programmer works with software for the I/O Terminal, which you can buy separately according to your needs.
There were many questions regarding the differences between the hw7.0 and 10 programmer, we present these differences below.
Difference between the HW 7.0 and HW 10 programmer
HW 8.0 is for users who going to work with more than one software, e.g. SIEMENS, BOSH, DENSO, etc ... each of these programs has a separate SIM card which must be inserted into the programmer before work.
Programamtor HW 7.0 has one slot for SIM card, HW 10 has 6 slots for SIM cards
The HW 7.0 Programmer has also standard OBDII cable which is the equivalent of TYPE1 of the HW 10 set
The possibility of both programmers are identical and work with the same software.
Features of the I/O TERMINAL Multitool HW 10
On the top of programmer there are:
- small button to switch between SIM cards,
- USB port (computer connection)
- No FIAT BSI switch with 120 Ω resistor from the circuit like in HW 8 before
Ad.1) The mono switch is used to switch between the cards you want to use. The LED display at the front of the programer is showing the number of the selected card.
Ad.2) The USB port is used to connect the programmer to the computer
The LCD display on the front of programmer shows the number of selected SIM card in operation.
Below the display there is a sticker, so you can write down number of the SIM slot assigned to the software. (it comes also with spare sticker)
If you have HW 8 - no sense buying HW 10 (not many changes)
After purchase you will receive:
- I/O TERMINAL HARDWARE MULTITOOL HW 10 programmer
- I/O TERMINAL PSA BSI Adapter (OBDII - DB9)
- I/O TERMINAL ECU Adapter (OBDII - DB9)
- USB 2.0 lead type: USB A/B - 1.8m
No software, no activations or activation files or SIM cards are included by buying this programmer. These are separate elements selected as needed.
Familiarize yourself with the software to learn about the programmer capabilities.
Related Products
CARPROG BASIC
What's the CarProg? Universal tool for car radios, odometers, dashboards, immobilizers repair with advanced functions like EEPROM and micro controller programmer, key transponder programmer and other..
BOSCH ECU software for I/O TERMINAL
BOSCH ECU TOOL for such as LAND ROVER, BMW,VOLVO,TOYOTA,HONDA,FIAT,OPEL and more This software support BOSCH controllers for OPEL / VAUXHALL, VOLVO, LAND ROVER, BMW, SMART, JEEP/CHRYSLER, H..
FIAT BSI 1 software for I/O TERMINAL
FIAT BSI TOOL This software support FIAT BSI (Built in systems interface) The BSI unit is the built-in systems interface which is at the heart of multi plex wired cars. Controls most things from..
I/O TERMINAL HW 9.0
I/O TERMINAL Programmer - HARDWARE HW9 This is only hardware, programmer unit & standard ECU adapter (ODBII-DB9) Previous versions of I/O TERMINAL were sold without housing, just PCB like AN..
Renault CAN/K-line ECU Tool
Renault CAN/K-line ECU Tool Programmer + Adapter ODBII (RS232 - DB9) + Software ECU Programming All OBDII tools offer some basic functionality, which includes the ability to r..
Emulator ESL Renault CAN500
Emulator ESL Renault CAN500500kbs PLUG &PLAY Emulateur ESL renault CAN 500Kbit/s for Renault without cut CAN wires. The emulator is used to check the correctness of operation steerin..
MULTI TOOL - OPEL/GM TCM software for I/O TERMINAL
OPEL/GM TCM ACTIVATION for TCM 6T30,6T35,6T40,6T45,6T50 OPEL/GM TCM is included as a part of the I/O TERMINAL MULTI TOOL software package This software Reads/Writes memories of OPEL/GM TCM&..
EDC15 Generator for I/O Terminal
EDC15 Generator for I/O Terminal the generator allows you to bypass the immobilizer What is that ? EDC15 generator let you send FX,FY and FZ needed signals for I/O Terminal to..