DNTVAGV1 Dynotest Seat Tarraco 2018-2023

The device is compatible with:

• Seat Tarraco 2018-2023

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation. 

Information about the operation modes of the device:

The hazard warning light on the dashboard will blink each time the device switches between modes.

Mode 1

To activate this mode, pull the high beam switch towards you 4 times or
press the rotary "OK" button 4 times.
In this mode, the mileage block function is not active. 

Mode 2

To activate this mode, pull the high beam switch towards you 4 times or
press the rotary "OK" button 4 times.
Upon activation, the hazard warning light on the dashboard will blink twice.
After that, the odometer will register 30 kilometers for every 100 kilometers driven.
The speedometer works as usual. 

Mode 3

Pull the high beam switch towards you 4 times or
press the rotary "OK" button 4 times.
The hazard warning light on the dashboard will blink 3 times.
From then on, the odometer will count 20 kilometers for every 100 kilometers driven.
The speedometer works as usual. 

Mode 4

To activate this mode, pull the high beam switch towards you 4 times or
press the rotary "OK" button 4 times.
The hazard warning light on the dashboard will blink 4 times.
After that, the odometer will count 10 kilometers for every 100 kilometers driven.
The speedometer works as usual. 

Dashboard:                                                                                           Button:

Important for successful installation and use:

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

How-to video: