DNTPORV1 Dynotest Porsche Panamera 971

The device is compatible with:

• Porsche Panamera 971

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation. 

Information about the operation modes of the device:

The hazard warning light on the dashboard will blink each time the device switches between modes.

Mode 1

In this mode, the mileage block function is not active. 

Mode 2

To activate this mode, press and hold the "Return" button for 3 seconds.
Upon activation, the hazard warning light on the dashboard will blink twice.
After that, the odometer will register 50 kilometers for every 100 kilometers driven, and the speedometer will display the actual speed. 

Mode 3

Press and hold the "Return" button for 3 seconds.
The hazard warning light on the dashboard will blink 3 times.
From then on, the odometer will count 2 kilometers for every 100 kilometers driven, and the speedometer will show the actual speed.

Mode 4

Press and hold the "Return" button for 3 seconds.
The hazard warning light on the dashboard will blink 4 times.
From then on, the odometer will be stopped - the mileage block function is active; the speedometer will show the actual speed. 

Important for successful instalation and use:

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.