DNTLAMB1 Dynotest Lamborghini Urus

The device is compatible with:

• Lamborghini Urus

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation. 

Information about the operation modes of the device:

The hazard warning light on the dashboard will blink each time when the device switches between modes.

Mode 1

Press the "OK" button four times.

The hazard warning lights will blink once.

In this mode, the mileage block function is not active. 

Mode 2

Press the "OK" button four times.

The hazard warning lights will blink twice.

After that, the odometer will register 50 kilometers for every 100 kilometers driven, and the speedometer will display the actual speed.

Mode 3

Press the "OK" button four times.

The hazard warning lights will blink three times.

From then on, the odometer will count 2 kilometers for every 100 kilometers driven, and the speedometer will show the actual speed.

Mode 4

Press the "OK" button four times.

The hazard warning lights will blink four times.

From then on, the odometer will be stopped; the speedometer will show the actual speed. 

Dashboard:                                                                                                Button:

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

How-to video: