DNTBENV1 Dynotest Bentley Continental Flying Spur 2007-2008

The device is compatible with:

• Bentley Continental Flying Spur 2007-2008

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Information about the operation modes of the device:

The tachometer pointer on the cluster will move each time the device switches between modes.

Mode 1

To activate this mode, pull the high beam switch towards you 4 times.
Tachometer pointer on cluster moves 1 time.
In this mode, the mileage block function is not active. 

Mode 2

To activate this mode, pull the high beam switch towards you 4 times.
Upon activation, tachometer pointer on cluster moves 2 times.
After that, the odometer will register 50 kilometers for every 100 kilometers driven.
The speedometer works as usual. 

Mode 3

Pull the high beam switch towards you 4 times.
The tachometer pointer on cluster moves 3 times.
From then on, the odometer will count 10 kilometers for every 100 kilometers driven.
The speedometer works as usual. 

Mode 4

To activate this mode, pull the high beam switch towards you 4 times.
The tachometer pointer on cluster moves 4 times.
After that, the odometer will be stopped - the mileage block function is active.
The speedometer works as usual. 

Dashboard:                                                                                   High beam switch:

Important for successful instalation and use:

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

How-to video: