DNTVAGV5 Dynotest Audi A4 B9 2015-2023 Analogue dash

The device is compatible with:

• Audi A4 B9 2015-2023 - Analogowy kokpit

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Information about the operation modes of the device:

The hazard warning light on the dashboard will blink each time the device switches between modes.
To switch between modes, use the RETURN button or the high beam switch.

Mode 1

Press the RETURN button 4 times.
The hazard warning light on the dashboard will blink once.
In this mode, the mileage block function is not active. 

Mode 2

To activate this mode, press the RETURN button 4 times.
Upon activation, the hazard warning light on the dashboard will blink twice.
Then, the odometer will register 10 kilometers for every 100 kilometers driven.
The speedometer will work SPORADICALLY. 

Mode 3

Press the RETURN button 4 times.
The hazard warning light on the dashboard will blink 3 times.
The odometer will count 10 kilometers for every 100 kilometers driven.
BUT- the speedometer will work normally and will show the actual speed. 

Mode 4

To activate this mode, press the RETURN button 4 times.
The hazard warning light on the dashboard will blink 4 times.
After that, the odometer will stop.
The speedometer will work SPORADICALLY. 

Dashboard:                                                                                              Button:

Important for successful installation and use:

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

How-to video: