DNTVAGV3 Dynotest Audi A6 2011-2016

The device is compatible with:

• Audi A6 2011-2016

It is not intended to be used on public roads.

The Plug and Play technology eliminates the need for soldering during installation.

Information about the operation modes of the device on Audi A8 cars

The hazard warning light on the dashboard will blink each time the device switches between modes.

Mode 1

Press the "OK" button 4 times.
In this mode, the mileage lock function is not active.

Mode 2

Press the "OK" button 4 times.
During activation, the hazard lights will blink twice.
After that, the odometer will record every 100km driven as 50km, and the speedometer will display the current speed.

Mode 3

Press the "OK" button 4 times.
During activation, the hazard lights will blink three times.
After that, the odometer will record each 100km driven as 10km, and the speedometer will display the current speed.

Mode 4

Press the "OK" button 4 times.
During activation, the hazard lights will blink four times.
In this mode, the odometer will stop - the mileage lock function is activated.
The speedometer will display the current speed.

IMPORTANT FOR SUCCESSFUL INSTALLATION AND USE

• During device connection/disconnection, the ignition must be turned off.
• Switching between modes should be done on a stationary car.
• When the device is in use, the selected mode will be retained (saved) after the ignition is turned off/on.

How-To Video coming soon!