AUTH-0024-3 9S12XE SECURITY
When purchase please include xprog "Hardware ID"
Last update: 2017.09.14
Compatible with XPROG-box software V5.8.3 or higher.
NOTE: Reset 9S12XE/XF security byte that enables read/write PFLASH, DFLASH, Emulated EEPROM
Requirements
- AUTH-0024-2
- ADP-0017 Rev.C
Supported devices:
- MC9S12XEG128
- MC9S12XET256
- MC9S12XEQ384
- MC9S12XE(Q,T)512
- MC9S12XEP768
- MC9S12XEP100
- CAS4 5M48H, 1N35H MCU man. date 1008, 1030, 1048, 1102, 1112, 1115, 1142,..., 1332, 1414
- XP8000E_XET256 2M53J
- MC9S12XF128
- MC9S12XF256
- MC9S12XF384
- MC9S12XF512
Supported masks: 0M53J, 1M53J, 2M53J, 3M25J, 5M48H, 1N35H, 0M64J, 1M64J, 2M64J
Programming interface: in-circuit (BDM).
Steps how to work with secured MCU
Make MCU<->XPROG connection, start software,...
- EXTAL and RESET pins must be lifted from PCB
Reset MCU security:
- a) Run->Change Security state->Reset MCU Security) required AUTH-0024-2, AUTH-0024-3
- b )wait 10..15 seconds if not success, cancel process.
- c) check connection
- d) Start from a
Remember MCU security byte value
Read, Write,... commands can be executed many times, required AUTH-0024-2
Set MCU security (Run->Change Security state->Set MCU Security) required AUTH-0024-2, AUTH-0024-3
